Different application methods for press-on nails

◦ Technical Principle: The glue contains cyanoacrylate, which quickly solidifies upon contact with the nail surface, forming a strong chemical bond. The glue penetrates the texture of the nail surface, and once cured, it provides lasting adhesion.
◦ Operation Steps:
i. Clean the nail surface with an alcohol pad and lightly buffer the nail surface to increase roughness.
ii. Apply a small amount of glue to the natural nail or the back of the nail piece, avoiding excessive glue spillover.
iii. Align the nail piece and press it from the cuticle to the tip of the finger for 10-15 seconds, ensuring no air bubbles remain.

◦ Technical Principle: Pre-cut double-sided adhesive tabs (containing low-sensitivity acrylic adhesive) are used to bond the nail piece to the nail surface, relying on the contact area between the adhesive and the nail bed to maintain adhesion.
◦ Operation Steps:
i. Select adhesive tabs that match the size of the nail bed and trim any excess edges.
ii. Remove the protective film from the adhesive tabs and press the nail piece onto the center of the nail surface for 20-30 seconds.
iii. To remove, simply lift the edge or soak in warm water to soften.

◦ Technical Principle: Made from natural plant gum or water-soluble polymer materials, the gel-like adhesive enhances fit by filling the gaps between the nail piece and the nail surface, with adhesion activated by pressure.
◦ Operation Steps:
i. Lightly buffer the nail surface to improve adhesion.
ii. Select a jelly gel pad of appropriate size and place it on the nail surface, then remove the protective film.
iii. Align the nail piece at the cuticle and press it, squeezing out any air bubbles. If necessary, use a hairdryer to heat and reinforce.

◦ Technical Principle: Relies on physical structures (such as magnetic attraction, silicone adsorption layer) or flexible materials to fit the nail surface without the need for adhesive.
◦ Operation Steps:
i. Directly align and press the nail piece onto the nail surface, adjusting the curvature for a perfect fit.
ii. To remove, gently lift the edge and clean the back of the nail piece for reuse.